3D MODEL DESCRIPTION
The Pirarucu is one of the largest freshwater fish you can find in Brazil. Its name means “red fish” because of his bright red scales. What a fiery guy!
All our fish articulated fish are print-in-place, and designed especially for better and easier assembly. For a mesmerizing movement effect, remember to only glue both sides on the pin connection.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Day 17 Hours 47 Minutes
- Approximately length: Fish 21.5cm x 7cm x 4cm
Stand 20cm x 12cm x 1.7cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!