3D MODEL DESCRIPTION
A tribute to melting moments and warped memories. Time might be slipping, but it still looks great on your shelf.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 05 Hours, 29 Minutes* (may vary according to you printer model)
Multiparts - 05 Hours, 32 Minutes* (may vary according to you printer model)
Multicolor - 10 Hours, 52 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 12 cm (assembled files)
- You'll need: Clock Mechanism (Maximum dimension 56mm x 56mm x 16cm) Amazon - AliExpress
*Note: Printing time based on a Bambu P1S printer, according to our tests.
*Note: If the clock mechanism comes with a metal bracket used to mount the clock on the wall, do not use it. For the second hand, use the model that comes with the clock engine.
ATTENTION: “Multipart” files requires super glue. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Yes, (Brim)
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
