3D MODEL DESCRIPTION
This penguin’s feeling lit!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 08 Hours, 08 Minutes (will vary accord to you printer model)
- Approximately Height: 8,5 cm
**SUGGESTION LINKS**
The links below are suggestions for the flameless candle. Attention to dimension, max acceptable is 35mm (1.4") in the diameter.
You Will Need To: Flameless LED Candle
Aliexpress (Select option A 40mm x 35mm) Amazon Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. you will used (Tree manual) support only “Top Candle File” on candle hole
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
