3D MODEL DESCRIPTION
A curious little bunny peeks out, clearly wondering what you hid inside. Cute, playful, and guaranteed to get smiles before it even gets opened.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 53 Minutes* (may vary according to your printer model)
Multiparts - 04 Hours 09 Minutes* (may vary according to your printer model)
Multicolor - 06 Hours 53 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 13 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Inner Brim) only on “rabbit part”.
- Others: You can use "concentric" top surface pattern in the "rabbit part" and in the "foot_multipart", “toe_multipart” set layer high 0,12mm to improve finish quality.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
