3D MODEL DESCRIPTION
A clicker covered in paw print texture, available from one to eight keys. Includes a keychain version and an articulated format where each key section snaps apart.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : WITHOUT Keychain - 10 Hours 19 Minutes* (may vary according to your printer model)
WITH Keychain - 10 Hours 22 Minutes* (may vary according to your printer model) - Approximately Height: 2 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
*Note: Time shown refers to the ‘Chain’ model. For more information on time and settings, please refer to the PDF provided.
YOU WILL NEED:
Blue Mechanical Keyboard Switch - Amazon - AliExpress - Mercado Livre
Split Key Ring with Chain - Amazon - AliExpress - Mercado Livre
Ring Conector 12 mm - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. Ear brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!