3D MODEL DESCRIPTION
No plans, no responsibilities, and zero tolerance for your nonsense. A true inspiration.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 10 Minutes* (may vary according to you printer model)
Multipart - 03 Hours 20 Minutes* (may vary according to you printer model)
Multicolor - 14 Hours 18 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Measurements: 05 x 10 x 2,5 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre
ATTENTION: “Multipart” files requires super glue. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Others: We use (Archimedean Chords) for finishing the top layers, if you prefer.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: For small “Multipart” parts, use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
