3D MODEL DESCRIPTION
If a parrot beak coat rack is the closest to pirate decor you’ll be allowed to have in the house, at least it looks super cool.
Like what you see? This amazing model was designed by 3dprintable_by_lucas.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 2 Hours 57 Minutes (will vary accord to you printer model)
- Approximately Lenght: 10 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!