3D MODEL DESCRIPTION
An echo dot is not the safest food for a bird… but for a robot, it might be fine.
This robot holds an echo dot for you. This is a print-in-place super simple and fast print, it’s articulated and needs no support.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 04 Hours 11 Minutes
- Approximately Height: 10 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!