3D MODEL DESCRIPTION
A playful tabletop balance game where players take turns placing pandas on a bonsai tree. One wrong move and the pandas start tumbling. Stay steady, place carefully, and try to be the player who doesn’t cause the fall
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 22 Hours, 06 Minutes* (may vary according to your printer model)
Multicolor - 02 Days, 14 Hours, 43 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximately Height: 25cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: Values applied to a single piece, you can use a more optimized personal profile, the “Multipart” files requires super glue.
We recommend a set of 35 pandas (5 of each type of panda).
To play, read the available manual.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3 walls only in “Bears” files, in “Bonsai” files use 2 wall.
- Recommended Infill (%): 40% (Gyroid) only in “Bears” files, in “Bonsai” files use 5%
- Needs Support: Yes, (Manual Grid) only in “Climbing and Hanging Panda” files.
- Build Plate Adhesion: Yes, (Brim) only in “Climbing and Hanging Panda” files.
- Others: To influence the weight of the parts, we used a greater amount of infill and walls.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
