3D MODEL DESCRIPTION
An ocarina shaped like an owl, detailed enough to display and functional enough to actually play. A piece that earns its place on any shelf.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 05 Hours 31 Minutes* (may vary according to your printer model)
Multicolor - 09 Hours 21 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 11 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: When painting the support, only do it on the feet. AVOID the hole area and the inner part, as this may affect the sound.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes. Standard support (manual), only under the feet.
- Build Plate Adhesion: Yes.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!