3D MODEL DESCRIPTION
Two figures walking along a path beneath a wide, sprawling tree with exposed roots, all inside a circular sculpted frame glowing from within. A piece that makes any space feel grounded.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours 41 Minutes* (may vary according to your printer model)
- Approximately Height: 19 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Requires super glue.
You will need:
LED Strip 12V - Amazon - Aliexpress - Mercado Livre
Power Supply 12V DC - Amazon - Aliexpress - Mercado Livre
Female DC Power Pigtail Cable - Amazon - Aliexpress - Mercado Livre
Inline On/Off Switch - Amazon - Aliexpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!