3D MODEL DESCRIPTION
A voronoi-structured stand that holds the PS5 upright with a sculptural, organic look. It fits every PS5 model and adds texture to any setup without taking over the space.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Fat - 07 Hours, 46 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Slim - 06 Hours, 46 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors) - Approximately Height: 14 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files not requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Manual Snug) only in “Fat Version” and in the “Screw Holes” of both versions.
- Build Plate Adhesion: No.
- Others: You can use a more optimized print profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
