3D MODEL DESCRIPTION
Killer whales are not actually killers, you know? Some of them are just sick sliders! This slider is a kids' size and made for flexible filament printing, which makes it a challenging print on its own, but we made sure to optimize it the best we could. This is our first ever model like this, so we would love some feedback from you. Print it out and let us know what you think!
- This STL file is recommended for FDM Printers using TPU!
- 3D Printing Time: 01 Day 20 Hours 08 Minutes
- Approximately length: 18 cm
- We HIGHLY recommend to reduce the “Deretraction Speed”, something about 30 mm/s.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - DIRECT DRIVE
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 35mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - BOWDEN
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 20mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!