3D MODEL DESCRIPTION
An oni mask built to hold a katana in place with the full weight of its glare. Wall decor and sword display in a single piece.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Desk Monocolor - 11 Hours, 35 Minutes* (may vary according to your printer model)
Desk Multiparts - 11 Hours, 40 Minutes* (may vary according to your printer model)
Desk Multicolor - 16 Hours, 53 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
Wall Monocolor - 09 Hours, 06 Minutes* (may vary according to your printer model)
Wall Multiparts - 09 Hours, 10 Minutes* (may vary according to your printer model)
Wall Multicolor - 14 Hours, 25 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: Desk - 24 x 15 x 10 cm (Assembled Files)
Wall - 22 x 15 x 10 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim Type) only for parts with poor adhesion to the build plate or tall parts that are at risk of falling.
- Others: You can scale it up or down depending on the size of your katana's scabbard, while staying within the print area of your 3D printer.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!