3D MODEL DESCRIPTION
A demon in disguise. Sharp edges, fast action, zero remorse.
- This STL file is recommended for FDM Printers!
- 3D Printing Time :LARGE
Monocolor - 22 Hours 40 Minutes* (may vary according to you printer model) - MEDIUM
Monocolor - 20 Hours 39 Minutes* (may vary according to you printer model) - SMALL
Monocolor - 18 Hours 28 Minutes* (may vary according to you printer model) - Approximately Height: 40 cm
Orthodontic Elastics 3/8 Heavy - Amazon Aliexpress Mercado Livre
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
Note: Due to the limited number of tables allowed by BambuStudio and the specific sizing requirements for the helmet/tiara, this item does not include the file or the button to open it directly in the BambuLab application.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (Tree).
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
