3D MODEL DESCRIPTION
A disc launcher with a classic, old-school revolver shape that brings character to every shot. For those who like their prints with a little history baked in.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours, 41 Minutes* (may vary according to your printer model)
Multiparts - 07 Hours, 40 Minutes* (may vary according to your printer model)
Multicolor - 22 Hours, 42 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 18 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You Will Need: Elastic Bands 2x - AliExpress - Amazon - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No, but you can use “Manual Support” if your profile isn't calibrated to create a uniform “Bridge.”
- Build Plate Adhesion: No, but you can use “Painted Brim” if your board has poor grip.
- Others: If you prefer, use the “Concentric” bottom and top layer style to create a more distinctive finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
