3D MODEL DESCRIPTION
I’m not saying they didn’t go to the moon. I’m just saying it looks staged. Almost as if it looked like a scene… of a phone holder… like this one! It doesn’t matter that they didn’t have smartphones yet. All that matters is that this model is easy to assemble, has 4 different sizes and that you should mind your retraction for better finishing results.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 01 Day 12 Hours 50 Minutes
- Approximately Height : 20 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!