3D MODEL DESCRIPTION
This owl is not going to bed anytime soon, so you might as well turn it on and admire its shapes while she keeps you company.
Your Night Owl requires some assembly. Follow the instructions on Readme file!
What you’ll need:
Solder
Soldering Iron
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 23 Hours 37 Minutes
- Approximately Height : 12,3 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: We have printed ours without supports (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use supports to make your print better)
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!