3D MODEL DESCRIPTION
Lion face spinners, each with its own mood, that spin right on your pen. Pick your vibe and let it rip.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Happy - 01 Hour, 10 Minutes* (may vary according to your printer model)
Multicolor Happy - 04 Hours, 36 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
Monocolor Rage - 01 Hour, 09 Minutes* (may vary according to your printer model)
Multicolor Rage - 05 Hours, 19 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Monocolor Sleep - 01 Hour, 11 Minutes* (may vary according to your printer model)
Multicolor Sleep - 05 Hours, 28 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 03 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This file does not require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!