Monster Surprise

3D MODEL DESCRIPTION

The classic monster, now pocket-sized and fully jointed. A fun little figure that fits inside a pumpkin box and brings big Halloween energy to any space.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 22 Minutes*  (may vary according to your printer model)
                                Multicolor - 06 Hours 50 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
• Approximately Height: 5 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests. Considering only one of the two available versions (keychain and figurine)

 Will you need; 

Split Key Ring with Chain - Amazon - Aliexpress - Mercado Livre

Ring Conector 12 mm - Amazon - Aliexpress - Mercado Livre

3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.

Pumpkin Mystery Box

3D MODEL DESCRIPTION

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 02 Hours 44 Minutes*  (may vary according to your printer model)
                                Multicolor - 11 Hours 14 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
• Approximately Height: 5.5 cm

ATTENTTION: Use the print settings described below. Also, reduce the print speed by 50% by selecting the corresponding option directly on your equipment's control interface. Follow this recommendation to ensure a successful print.

3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 50mm/s Initial Layer / 50mm/s Initial Layer Infill | 60 mm/s Outer Wall | 150mm/s Inner Wall | 200 mm/s Sparse Infill | 200 mm/s Internal Solid Infill | 150 mm/s Top Surface
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!