3D MODEL DESCRIPTION
Stack, snap, and mix up little monsters, no feeding required.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hour, 22 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 17 Hour 12 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 06 colors) - Approximately Measurements: 4,5 x 4,5 x 01 cm (each models)
*NOTE: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Note: This model has a built-in magnet slot, and to insert it.
IMPORTANT: This model you will need 6x neodymium magnets measuring 12x5 mm and super glue for the back cover parts. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Tree)
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
