Monkey Pause 

3D MODEL DESCRIPTION

Took a break mid-swing and never resumed.
Liked what you see? This model was designed by @neongravestoneart

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor** - 01 Hour, 43 Minutes* (may vary according to you printer model)
                                Multipart** - 01 Hour, 33 Minutes*  (may vary according to you printer model)
                                Multicolor** - 09 Hours, 11 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
• Approximately Length: 12 cm (Monkey Pause Large) -  06 cm (Monkey Pause Keychain)**
   

*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note: Large and Keychain files

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and assembly instructions to ensure correct fitting.

You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre

                           Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre

 ATTENTION: In ‘’Multipart” files it will be necessary to apply glue. 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: Yes. (Brim) only ‘’Multipart’’ files.
• Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!