3D MODEL DESCRIPTION
Let the smoke flow down this quiet mountain, like fog rolling through a dream.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Hours 21 Minutes* (may vary according to you printer model)
Multipart - 04 Hours 12 Minutes* (may vary according to you printer model)
Multicolor - 09 Hours 14 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 07 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need: Ceramic Spacer/Washer 6.5 x 24 x 09 - Amazon
ATTENTION: “Multipart” files requires super glue. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
