3D MODEL DESCRIPTION
A full setup built around miniature painting: rack for paint pots, mixing tray, and a perforated stand to hold pieces upright while they dry. Everything a miniature painter needs on one surface.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Day 03 Hours 39 Minutes* (may vary according to your printer model)
- Approximately Height: 20 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
Note: Supports layered color-changes. We used the layered color change to add some color.
Itens you may need (optional):
Alligator Clips - Amazon - Aliexpress - Mercado Livre
Painting Alligator Clip Stick - Amazon - Aliexpress - Mercado Livre
Bamboo Skewers - Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes (Inner Brim), only in “Dry Brush Tray_Frame”.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!