3D MODEL DESCRIPTION
Tea-rrifically adorable and zero calories!
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hour, 28 Minutes* (may vary according to you printer model)
Multicolor - 01 Hours, 42 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 05 cm
*Note 1: Printing time based on a Bambu P1S printer, according to our tests.
*Note 2: This model has a built-in magnet slot, and to insert it, a print pause must be scheduled at the corresponding layer.
IMPORTANT: If your nozzle is metal, it may attract the magnet. A drop of super glue might be necessary and this model you will need 1x neodymium magnets each cup measuring 10x2 mm. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
