3D MODEL DESCRIPTION
The only way of having a standing still whippet is 3D printing it. And this one does it with grace! This support free model is simple to print, our only suggestions are the use of brim on the front paws, and to have lots of fun with the multicolor option.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 8 Hours and 18 Minutes
- Approximately Height : 14cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!