Memo Tower - Table Lamp & Organizer

3D MODEL DESCRIPTION
 

A lit memo board that keeps notes visible and the desk surface clear. It holds papers, photos, and small items while adding a soft glow to the room.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 05 Hours 00 Minutes*  (may vary according to your printer model)
• Approximately Height: 1 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

YOU WILL NEED:

Bambu LED Kit Amazon - Aliexpress - Bambu

Candle LED Amazon - Aliexpress - Mercado Livre

Led G9 Amazon - Aliexpress - Mercado Livre

Socket Led G9 Amazon - Aliexpress - Mercado Livre 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.
• Others: 
  1. For the object “Memo Tower_Outer.Wall_Monocolor,” select the “Wall” object and change the settings:
     1. Top shell layers: 0; Bottom layers: 0; Sparse infill density: 50%.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!