3D MODEL DESCRIPTION
Not really extinct, they just found a new light at the end of the tunnel.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 02 Days, 05 Hours (will vary accord to you printer model)
- Approximately Height: 23 cm
- You will need to assemble this product: 01 E27 Light Bulb Holder (Aliexpress / Amazon / Mercado Livre)
01 E27 LED Bulb (Aliexpress / Amazon / Mercado Livre)
01 Wire (we use 1 meter long)
01 Power Plug (choose according to your country)
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid) (Only on “Front Head” and “Back Head”) and 10% (Gyroid) (To all other parts).
- Needs Support: Yes (Only on “Body” file).
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!