3D MODEL DESCRIPTION
The guardian of the afterlife now runs on something more powerful than magic. Pose it at your desk and let it judge who interrupts your focus.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 05 Hours 47 Minutes* (may vary according to your printer model)
Multiparts - 06 Hours 46 Minutes* (may vary according to your printer model)
Multicolor - 21 Hours 57 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height (assembled): 20 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Requires super glue.
Note: We do not recommend the use of SILK filaments for this piece. The piece contains fittings and joints, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-type filament is at your discretion.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, tree.
- Build Plate Adhesion: Brim, only in “legs multipart” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!