3D MODEL DESCRIPTION
Floating gently, thinking slow, smiling always.
Liked what you see? This model was designed by @neongravestoneart
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours, 43 Minutes* (may vary according to you printer model)
Monocolor** - 29 Minutes* (may vary according to you printer model)
Multicolor - 03 Hours, 44 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor** - 01 Hours, 42 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 03 cm (Manatee in Ocean Rest) - 1,5 cm (Keychain Manatee in Ocean Rest)**
*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note: Keychain files printing time.
ATTENTION: For more information see "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
