3D MODEL DESCRIPTION
The Magic Carousel is a rotating display made to showcase your unicorn collection. Arrange your favorite characters around it and create a fun centerpiece to present them all together.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 15 Hours 53 Minutes* (may vary according to your printer model)
Multiparts - 18 Hours 20 Minutes* (may vary according to your printer model)
Multicolor - 16 Hours 05 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” “Multicolor” and “”Monocolor” files requires super glue.
Note: We do not recommend the use of SILK filaments for this piece. The piece contains fittings and joints, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-type filament is at your discretion.
ATTENTION IN ASSEMBLY: For the carousel to function correctly, the poles have a specific mounting position. You can use the image as a reference for fitting the Ride Poles. For more information and a video tutorial, access the “HOW TO” section on the product page.
TIPS AND TRICKS: At the base and support post, you can use variable layer height to improve the finish of the raised section responsible for the unicorns movements. Or, before assembly, you can smooth the inner surface of the base and the support posts to reduce friction and allow for smoother movement. The surface finish is very important for the proper functioning of the carousel, and the procedures described above will help you with that.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Support painting (central column).
- Build Plate Adhesion: Yes. External brim.
- Others: For the top, use 3% infil. For the central column, use 10% infil.
- Top surface pattern: Concentric
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
