3D MODEL DESCRIPTION
She-loves-me, she-loves-me-not. Well, I don’t know, but we surely love this puzzle!
Our Macaw is a multicolor piece that works as a puzzle by placing each feather into the printed body. The head is printed separately and is pre-supported on the beak, but the body needs no supports. The feathers are printed in a detachable card. If you fancy tidying the feathers, apply heat softly with a blowdryer. Mind the printing on the first layer and you’re good to go.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 01 Day 13 Hours 26 Minutes
- Approximately Height: 25 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!