3D MODEL DESCRIPTION
A Christmas tree designed to house a light source inside. The glow comes through the structure and turns any corner into a warm focal point.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours 47 Minutes* (may vary according to your printer model)
Multicolor - 01 Day, 09 Hours 25 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Files requires super glue.
YOU WILL NEED:
Candle LED - 2032 - Amazon - AliExpress - Mercado Livre
Candle LED - LR1130 - AliExpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 0% (Concentric)
- Needs Support: No.
- Build Plate Adhesion: Yes. Inner brim and Brim ear.
- Others: Reduce print speed for tall parts.
- Top surface pattern: Concentric.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
