3D MODEL DESCRIPTION
A soft, glowing presence designed for intimate corners. Lumen emits a gentle, steady radiance that warms the room and brings calm to any surface it rests on.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours 33 Minutes* (may vary according to you printer model)
- Approximately Height: 27 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.
You can choose your preferred light source from the options of Bambu LED Lamp or LED bulb.
Important: Always use LED light sources to avoid damaging your light fixture.
Links: Bambu LED Kit: Bambu Store Amazon Aliexpress
E27 Socket: Mercado Livre Amazon Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (Only for End Light Module).
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
