3D MODEL DESCRIPTION
The complete leg in printable form, from hip joint to toes, with each bone separated for detailed anatomical study. Ideal for understanding the structural foundation of human movement.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 02 Days, 01 Hours, 16 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
- Approximately Height: 95 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Grid)
- Needs Support: Yes, (Snug Auto) you can use the “Paint Tool” to add or remove the support.
- Build Plate Adhesion: Yes, (Brim) only on parts that don't adhere well to the print bed, for some files, you can also use “Painted Brim.”
- Others: You can also use the “Support Tool” for some parts, since some are too tall and might fall over during printing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!