3D MODEL DESCRIPTION
A decorative bird sculpture that keeps a spare key out of sight. It looks like a decor piece, and that is exactly the point.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 08 Hours 44 Minutes* - 144 g of filament (may vary according to your printer model)
- Multicolor - 10 Hours 04 Minutes* - 158 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 03 colors)
- Multipart - 08 Hours 56 Minutes* - 144 g of filament (may vary according to your printer model)
- Approximately Height: 24 x 15 x 06 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 20 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, only on: Bird Large Base, Bird Large Cover, Bird Small Base, Bird Small Cover (outer brim).
- Others: Use (Manual Brim) and (Manual Support) only on the "Cover" and "Base" files of each type.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
