3D MODEL DESCRIPTION
That’s a lot of love, but you can handle it.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day, 11 Hours, 19 Minutes (will vary accord to you printer model)
- Approximately Height: 20 cm
- You will Need: Led Candle - Aliexpress - Mercado Livre - Amazon
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3 Walls in “Body-Files” and you need 5 Walls in “Hearts-Files”
- Recommended Infill (%): 10% (Gyroid) in “Body-Files” and you need 10% (Concentric) in “Hearts-Files”
- Needs Support: Yes. only “Hearts-Files”
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
