3D MODEL DESCRIPTION
A bat that wears its heart on its... hands. Pop it on your keychain and let people wonder what's hiding inside those wings.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours, 21 Minutes* (may vary according to your printer model)
Multiparts - 01 Hours, 30 Minutes* (may vary according to your printer model)
Multicolor - 06 Hours, 16 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 16 x 08 x 02 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You Will Need: Ring with Chain 25mm - 1x - Amazon - AliExpress - Mercado Livre
Ring 12mm - 1x - Amazon - AliExpress - Mercado Livre
Neodymium 5x2 - 2x - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm, You can use (Concentric) in base layer and a top layer for a better finish files.
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No. but use (Brim) If your print bed has poor adhesion.
- Others: You can use a more optimized profile to print this drop.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!