3D MODEL DESCRIPTION
A meditative figure seated on a lotus flower base that doubles as a planter. It brings a quiet ritual feel to any surface.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 32 Minutes* (may vary according to your printer model)
- Approximately Height: 16 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Yes. outer Brim only.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!