3D MODEL DESCRIPTION
Closed loops that work solo or link together into something larger. A clean, curved shelf system that fits modern walls without trying too hard.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Kit 1 - 01 Day 05 Hours 46 Minutes* (may vary according to your printer model)
Monocolor Kit 2 - 01 Day 17 Hours 52 Minutes* (may vary according to your printer model)
Monocolor Kit 2 - 02 Day 00 Hours 29 Minutes* (may vary according to your printer model)
- Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Note: For the finishing you will need a piece of filament 1.75mm of diameter. Check out the video “How to assemble” for more information.
ATTENTION: Supports about 1 kg.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
