3D MODEL DESCRIPTION
A sculptural table lamp shaped like a dense organic mass, as if light forms from within. Its layered, bio-inspired surface softly diffuses illumination, creating a warm, atmospheric glow.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 08 Hours, 49 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
- Approximately Height: 23 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light. Always use LED light sources to avoid damaging your light fixture.
On this project you can choose between 3 types of light source:
G9 (you’ll need to print the g9 adapter)
Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
Tea Light Candle (dismantle the candle and use only the bottom part. The slot on the base is designed for a 3.4 mm diameter) - Led Candle - Amazon Mercado Livre Aliexpress
Bambu LED Kit: Bambu Store Amazon Aliexpress
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 8% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!