3D MODEL DESCRIPTION
A headband with devil horns and bat wings for the back, because some cats were born for this look. The most honest costume for a pet that already rules by chaos.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 07 Hours 15 Minutes* (may vary according to your printer model)
- Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests, and considering the large size option.
ATTENTION: “Multipart” files requires super glue.
Will you need;
Elastic Cord 3mm: Amazon - Aliexpress - Mercado Livre
Wide Elastic Band 3cm (1”): Amazon - Aliexpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, only in “wing” files.
- Build Plate Adhesion: Brim, only in “Elastic Band Bucket” file”.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!