3D MODEL DESCRIPTION
Some might argue the fact that the lion is the king of the jungle while living in the savannah, but the truth is it actually lives in your house!
Like what you see? This amazing model was designed by 3dprintable_by_lucas.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 12 Hours 55 Minutes (will vary accord to you printer model)
- Approximately Lenght: 10 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!