Lightwings - Table Lamp

3D MODEL DESCRIPTION
 

  Graciously guarding the fire, and lighting your place. Let’s hope it doesn’t spread though.
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Multipart - 18 Hours, 50 Minutes*  (may vary according to you printer model)                                     
                              Multicolor - 02 Days, 06 Hours, 06 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 05 colors)
• Approximately Height: 26 cm (assembled files)
  
   

*Note: Printing time based on a Bambu P1S printer, according to our tests.

ATTENTION: This model has a complex piece (Wings) that, to ensure a proper result, please watch the "How to Slice" video carefully.

ATTENTION: This files requires super glue. You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.

You Will Need: Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
                          LED Lamp G9 - Amazon - AliExpress - Mercado Livre   

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.                

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.16 mm
• Recommended Layer Height:  0.16 mm
• Others: We use (Archimedean Chords) for finishing the top layers.
• Recommended Perimeters/ Walls: 3 walls in almost parts, and 2 Wall only on “Fire” file.
• Recommended Infill (%): 10% (Gyroid) and you will need to use 0% infill only on light “Fire” file.
• Needs Support: Yes, (Tree Type) only “Wings” files.
• Build Plate Adhesion: Yes. (Brim) only in the smallest parts with low bed adhesion.
• Others: For small part use a 0.12 mm profile for better finishing.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!