3D MODEL DESCRIPTION
He was such an illuminated person.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day 14 Hours 38Minutes (will vary accord to you printer model)
- Approximately Height: 21,5 cm
LAMP SOCKET: Alliexpress / Amazon
FIRST FIT THE LAMP SOCKET WITH THE PRINTED SUPPORT INTO THE OUTLET, THEN FIT THE SKULL INTO THE SUPPORT.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 2 Walls for Skull and 03 Walls for Plug.
- Recommended Infill (%): 20% (Lighting) only “skull” file, on “holder lamp” file you need to use 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!