3D MODEL DESCRIPTION
Dark, dramatic, and still better at holding it together than you.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours 52 Minutes* (may vary according to you printer model)
- Approximately Height: 23 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Lens” file requires super glue and specific settings.
For this model you will need LED Candle: Mercado Livre Amazon Aliexpress
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm (for “lens” file use 0,12mm)
- Recommended Layer Height: 0.2 mm (for “lens” file use 0,12mm)
- Recommended Perimeters/ Walls: 3. (for “lens” file use 2)
- Recommended Infill (%): 5% (Gyroid) (for “lens” file use 0%)
- Needs Support: Yes.
- Build Plate Adhesion: Yes, only in “Lens” file.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!