3D MODEL DESCRIPTION
Are you quick enough to hook the leprechaun in place before your adversary does?
- This STL file is recommended for FDM Printers and Resin Printers!
- 3D Printing Time Based on Ender 3: 05 Days 21 Hours 25 Minutes (will vary accord to you printer model)
- Approximately Height: 29 cm
3D PRINT ASSEMBLY
- Use 4 pieces 11,5 to 12cm nylon thread to hang the Leprechaun from the tree. After tying it to the branch, the length of the thread should be from 11 to 11,5cm.
- In order to play this games with your friends you will need to print : 4 - Leprechaun or Top Hat
4 - Tree_Branch
4 - Tree_Branch_Cut
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!