3D MODEL DESCRIPTION
Completely relaxed and stretched across the branch. A comfortable pose for the panda, but maybe not the safest one for the balance.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 29 Minutes* (may vary according to your printer model)
Multicolor - 05 Hours, 14 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 02 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: Values applied to a single piece, you can use a more optimized personal profile.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 40% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: To influence the weight of the parts, we used a greater amount of infill and walls.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
