3D MODEL DESCRIPTION
A ladybug cannot change its spots but it can change the way you store your jewelry and trinkets! This super simple support free beauty needs some attention on your movement travel, so make sure your printer is well aligned. Play around with the multicolor option and figure out which color suits your lady best!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 17 Hours 08 Minutes
- Approximately Length : 13 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!