3D MODEL DESCRIPTION
The sea doesn't just sink ships, sometimes it swallows them whole. This centerpiece scene is built for dramatic encounters and campaign-defining moments on the table.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 18 Hours, 36 Minutes* (may vary according to your printer model)
Multiparts - 21 Hours, 16 Minutes* (may vary according to your printer model)
Multicolor - 02 Days, 20 Hours, 26 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 17 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only in “Tentacles” and “Suctions” files.
- Others: For a better finish, use a more precise profile optimized for the smaller perimeters of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!